Husqvarna WS 440 HF

WS 440 HF electric wall saw gives you increased possibilities for fast and efficient cutting in reinforced concrete, brick and other building materials, up to 21 in. thickness. Use this wall saw for all kinds of openings and sawing including stair, bevel and flush cutting. The user-friendly ergonomic design and ease of transport make your job fast and efficient. WS 440 HF can be combined with CS 10, transforming it into a perfect wire saw.

Our local salesman can give you price quotes, book a demo or give you a call to talk more.
Article number :
WALL SAW WS 440 HF 400-480V | 800/1200 mm | 4-pin | 4 track - 966 86 83-20

FEATURES

Want to take a closer look? Learn more about the product in depth by exploring its features and benefits.

WS 482 HF

Impressive power to the spindle

The strong motor produces high power to the spindle, even though the saw is light.

WS 482 HF new bladeguard

Easy to transport and setup

Built on a modular system, the saws are easy to carry thanks to the optimized weight of each module. The weight is also evenly distributed between rail and saw head, because the carriage stays on the track.

Deep cutting depth, even with starter blade

Large maximum starter blade enables deep cutting without changing blades.

WS 440 HF

Retains high power for efficient sawing

Highly efficient electric motor retains high power to the spindle over a wide rpm range. Minimum water needed for cooling, which means less slurry.

WS 440 HF
WS 482 HF

Impressive power to the spindle

The strong motor produces high power to the spindle, even though the saw is light.

WS 482 HF new bladeguard

Easy to transport and setup

Built on a modular system, the saws are easy to carry thanks to the optimized weight of each module. The weight is also evenly distributed between rail and saw head, because the carriage stays on the track.

WS 440 HF

Deep cutting depth, even with starter blade

Large maximum starter blade enables deep cutting without changing blades.

WS 440 HF

Retains high power for efficient sawing

Highly efficient electric motor retains high power to the spindle over a wide rpm range. Minimum water needed for cooling, which means less slurry.

SPECIFICATIONS

Motor

Output shaft RPM, max
1200 rpm
Max spindle torque, Nm
125
Spindle starting torque, Nm
100
Voltage, min
400 V
Voltage, max
480 V

Cutting equipment

Arbor diameter
1/2.4 in
Blade diameter, max
48 in
Blade diameter, min
24 in
Cutting depth, max
21 in
Starter blade diameter, max
39 in

Transmission

Number of gearbox speeds
1

Dimensions

Weight saw unit
25 kg

Sound and noise

Sound power level, guaranteed (LWA)
109 dB(A)
Sound power level, measured
108 dB(A)
Sound pressure level at operators ear
85 dB(A)

Other

Water flow, min
0.92 gal (US)/min
Water temp at min flow, max
25 °C

Spare Parts

Find your spare part article number

Here you can download the illustrated parts list for your wall saw.
Download WS 440 HF parts list

DIAMOND TOOLS

WHERE TO BUY
FIND A DEALER NEAR YOU
You might need to accept that the browser uses your current location
  • Where to buy?
  • Where to service?
  • Where to rent?
  •  
You can find your contacts by performing a search above or zooming in on the map.