Tools for surface preparation - EZ tool system

Removal and preparation tools

PREP SERIES group
EZ PREP SERIES

The PREP Series is part of the SUPERPREP series and consists of four different tools; PREP 0, PREP S1, PREP M1 and PREP H1.

PREP 0 is a versatile and aggressive tool for removal of coatings up to 2 mm, such as screed, paint, glue, epoxy. Works very well on both hard surfaces and abrasive uneven surfaces.

PREP S1, M1 and H1 are specially developed for levelling and removal of coatings up to 1 mm for resp soft and abrasive, medium and hard concrete.

Products in EZ PREP SERIES
T-REX SERIES group
T-REX SERIES

The T-REX series consists of tools Dome, Super, Classic and Rings.

Dome is developed for tough stripping such as removal of epoxy, glue or cementitious toppings thicker than 3 mm. The tool consists of one Poly Crystalline Diamond (PCD) segment and a PCD dome that join forces to generate a highly powerful floor preparation tool for thicker coatings.

Super is ideal for our bigger grinders that have ability to generate the power necessary to optimise their performance. These tools have power needed to remove coatings up to 3 mm.

For our smaller grinders Classic is a great option since fewer segments per tool means more weight and power into the floor.

The Rings are thanks to their design able to handle even more uneven surfaces, and they are also equipped with special canals for efficient removal of dust and heat, keeping the PCD's clean and high performing longer.

The protective segment on some of the tools are there for a prolonged life and a more controlled removal. All tools are available in both A and B versions.

  • NEU
RAVAGER SERIES group
RAVAGER SERIES

The RAVAGER series is specifically developed for creating a bush hammered surface or to expose large aggregate, but also for creating a bush hammered profile perfect for high traction exterior surfaces. The 180 mm version is suitable for our smaller grinders.

All tools have potential for high stock removal capacity and can remove rigid and brittle coatings.

Products in RAVAGER SERIES

Concrete grinding - metal tools

SMHXX SERIES group
EZ SMHXX SERIES

The SMHXX series consists of five different tool series where;

The S series is developed for grinding of soft and abrasive surfaces. Soft concrete, asphalt or other porous materials are often very abrasive and tools risk being worn out quickly if not chosen wisely.

The M series is an all-around tool for medium hard concrete, and in some cases also natural stone and terrazzo.

The H series has a specific diamond and bond specification developed to work efficiently for grinding of medium hard to hard concrete, whereas the X tools is developed for rough grinding of extremely hard concrete. Grinding extremely hard concrete can provide challenges and this series is perfect for those tricky situations.

The XX series has a special bond and design developed for grinding extremely hard concrete when the X-series isn’t up to the task.

TOOL RINGS group
TOOL RINGS
Products in TOOL RINGS

Concrete polishing - resin tools

  • NEW
SF SERIES group
SF SERIES
Products in SF SERIES
  • NEW
SP SERIES group
EZ SP SERIES
Products in EZ SP SERIES

Special application tools

  • NEW
DIAMOND TRANSITIONAL SERIES
Products in DIAMOND TRANSITIONAL SERIES
  • NEW
DF SERIES group
DIAMOND FENIX SERIES
Products in DIAMOND FENIX SERIES
  • NEW
DB SERIES group
EZ DIAMOND BLOCK SERIES
Products in EZ DIAMOND BLOCK SERIES

Edge grinding tools

web banner EDGE SM HX SERIES group
EDGE GRINDING SERIES

SM EDGE and HX EDGE series are metal bond diamond cup wheels for grinding of soft to medium respecitve medium to hard concrete using handheld machines. When grinding edges, follow the same steps as for the rest of the floor. The tools for edges mirror the logic and performance of the planetary tool series.

Products in EDGE GRINDING SERIES
web banner EDGE DF DT SERIES group
SPECIAL APPLICATION EDGE SERIES

The DT EDGE series have great scratch removal ability which enables you to move safely between metal and resin tooling. This series works well on all types of concrete, which it is essential for the contractor to remove scratches from the initial metal bond grinding steps.

Diamond Fenix Edge (DF EDGE) is perfect for grinding and polishing of concrete and cementitious toppings such as overlays or screed. Thanks to its flexible pads it is also a good problem solver in case of minor low spots when grinding and polishing concrete.

Products in SPECIAL APPLICATION EDGE SERIES
web banner EDGE SP SERIES group
EDGE POLISHING SERIES
Products in EDGE POLISHING SERIES
web banner EDGE T-REX PREP group
EDGE PREPARATION SERIES

As the other T-REX tools, the T-REX EDGE is specifically developed for extreme coating removal and floor preparation. The tool has an extremely high removal capacity and can remove even thick coatings such as epoxy acrylic, paint and residues of glue and screed. Whereas the PREP 0 EDGE is an aggressive metal cup wheel for removal of coatings up to 2 mm, such as screed, paint, glue, epoxy. Works very well on both hard surfaces and abrasive uneven surfaces.

Products in EDGE PREPARATION SERIES

Wood grinding tools

SL SERIES group
EZ SL SERIES
Products in EZ SL SERIES
Oiling Pad for floor grinders
Oiling pads

The wood oiling pad is used for oil treatment of wooden floors and is suitable for grinders with 180 mm grinding holders.

Note that this product is only sold as 3-pack.

Products in Oiling pads

Natural stone tools

  • NEW
SGW SERIES group
SGW SERIES
Products in SGW SERIES
  • NEW
DX SERIES group
DIAMOND XPRESS SERIES
Products in DIAMOND XPRESS SERIES
Where to buy
Find a Husqvarna dealer near you
You might need to accept that the browser uses your current location
  • Where to buy?
  • Where to service?
  • Where to rent?
You can find your contacts by performing a search above or zooming in on the map.