Salesman image


2.1 Safety clothing


+
+
+
+
+
Safety clothing

Dress right from head to toe

Although we're actively working on how to make our machines even safer, it's always important that you're properly dressed when you're working with a power cutter. This is what you should wear.

2.2 Transport and storage


+
+
+
+
+
Transport and storage

Extend the lifespan of your equipment

The right transport and storage of your machines, fuel and blades minimises the risk of incidents. But most importantly, it keeps your equipment in good condition for longer.

2.3 Choosing your blade


Asphalt global

 

Asphalt

Concrete global

 

Concrete

Granite global

 

Granite

Marble global

 

Marble

Abrasive global

 

Abrasive

Tiles global

 

Tiles

Universal global

 

Universal

Reinforced concrete, asphalt global

 

Reinforced concrete / Asphalt

Wondering what blade to choose?

The recommendation chart on the packaging tells you which applications the blade is suitable for. Never choose a blade that's not recommended for your power cutter. And don't use a blade with a maximum speed rating that is lower than your machine. Wet and dry cutting require different types of blade. Make sure that you choose the right blade for your application.

Introducing Smarter Blade

To promote safety and performance when operating a handheld power cutter, Husqvarna now introduces new smarter blades in the Elite-cut, Vari-Cut and Tacti-Cut series.
+
+
+
+
+
Smarter blade illustration

2.4 Checking and mounting blade


Here's the correct way to mount a blade to ensure that it will work properly when you start cutting. Watch the video to the right or read the instructions below.

Mounting Blade
  1. Before you start, make sure that the stop button is in the STOP position.
  2. Check the spindle and flange washers and change parts that are warped, notched or indented.
  3. Check the arrow on the blade to make sure that the diamond blade will rotate in the right direction when mounted on the machine.
  4. If there's no rotation arrow, check the direction of the tails attached to the diamonds found on each segment. The tails should follow the diamonds when the blade rotates. Ensure that the blade has a step/edge between the blade core and the segments.
  5. Use an arbour bushing with the right dimension to the centre hole in the blade. The power cutters K 760 and K 970 have a reversible arbour bushing that fits both a 20 mm and a 25.4 mm centre hole.
  6. Place the blade on the bushing between the inner and outer flange washers.
  7. Tighten the bolt holding the blade. Tightening torque is 25 Nm.
  8. Finally, pull the blade guard forward and backward check that it’s working properly.

2.5 Petrol and oil


+
+
+
+
Petrol and oil

Get the most out of your power cutter

The right petrol and engine oil for your machine allows you to work efficiently for a longer time. It also means less wear on the engine

2.6 Mixing petrol


How to mix petrol and oil:

Mixing petrol

1a. Always use a clean container.

Mixing petrol

1b. Fill it halfway with petrol.

How to mix petrol and oil:

Mixing petrol

2a. Pour in all engine oil.

Mixing petrol

2b. Shake the container thoroughly to mix the petrol and engine oil.

How to mix petrol and oil:

Mixing petrol

1a. Always use a clean container.

Mixing petrol

1b. Fill it halfway with petrol.

How to mix petrol and oil:

 

Husqvarna two stroke oil XP 1 litre

The correct petrol / oil ratio is 1:50 (2 % Husqvarna oil or equivalent). Our dispensing bottles hold 10 cl of oil for 5 litres of petrol.

2.7 Refuelling


Here are some basic tips on how you should refuel in order to get started quickly and stay safe. Watch the video to the right or read the instructions below.

Refuelling
  1. If you've just used the machine, let the engine cool down for a few minutes.
  2. Keep a safe distance of at least three metres from the working area.
  3. Lay the machine down on its side and open the fuel tank cap.
  4. Use a container with a spout to avoid spilling fuel.
  5. Tighten the fuel cap on the power cutter (and also on the container, if the spout is removed).
  6. Wipe off any fuel that has spilled on the machine or on the ground. If you've got fuel on your clothes – change them.

2.8 Power and Generators


To get maximum power out of an electric power cutter it is essantial to use the right power supply. 
Below you find a table to help choose the right electrical equipment.


MACHINE VOLTAGE PHASE FUSE RATING EXTENSION CABLE
RECOMMENDATION
GENERATOR
SPEC MIN.
K3000/K4000 110V SINGLE 15A 1,5mm2 max 20m / 2,5mm2 max 40m 3kVA (100-130V) 50-70Hz Generator earth connection required
  230V

SINGLE

13A 1,5mm2 max 30m / 2,5mm2 max 50m 4kVA (200-250V) 50-70Hz Generator earth connection required
PP65/PP220 (K6500 SERIES) 230V SINGLE 16A 2,5mm2 max 20m 5kVA (220-240V) 50-70Hz Generator earth connection required
  480V TRIPPLE 3x 10A 3x 2,5mm2 max 20m 10kVA (3x380-3x400V) 50-70Hz Generator earth connection required