What are you looking for?

Or you looking for spare parts?

Recommended products based on your search

Husqvarna floor saws and diamond blades for cutting asphalt and concrete

In floor sawing, maximum productivity can only be achieved by a well balanced formula of power, ergonomics, torque, manoeuvrability and reliability. All factors must collaborate efficiently, so you can get the most out of your working day. It’s about the interplay between you, the machine and the diamond blade as a whole. This is what makes Husqvarna floor saws the ideal choice for maximum productivity.

With our complete line-up of top-quality machines, ranging from big, powerful road saws with Tier 4/Stage IIIB compliant diesel engines to small agile floor saws with reliable petrol engines, we can offer a suitable machine for every job.

“Husqvarna supports everything that we do.”

Kris Gooding, Texas cutting & coring, Austin

Count on productivity – cut down emissions

Husqvarna FS 7000 D and FS 5000 D are ideal for mid-sized road work, service work and smaller jobs that require high production rates. Both are highly versatile thanks to their high output, compact size and good manoeuvrability.
Fs 5000 D / FS 7000 D launch video

Faster

  • Higher engine power and torque increase the production rate.
  • The electronic tracking control makes cutting in a straight line fast and easy.
  • You can make deeper, straighter cuts, which increases your productivity.

Cleaner

  • The diesel engines comply with Tier 4/Stage IIIB emission regulations.
  • They are equipped with electronic fuel injection and exhaust gas recirculation systems for more efficient combustion.
  • The particle filter (DPF) on FS 5000 D and the catalyst (DOC) on FS 7000 D reduce emissions in the exhausts.

Husqvarna FS 5000 D is a EPA Tier 4/EU Stage IIIB compliant flat saw with diesel engine.

What does stage IIIB and Tier 4 mean?

“Stage IIIB” is EU legislation and “Tier 4 Final” is US legislation. They require reduced exhaust emissions from diesel engines, including reduction of particulate matter (PM) and nitrogen oxides (NOx). They also regulate emission levels of hydrocarbons (HC) and carbon monoxide (CO).

”There is not a saw out there that can compete with Husqvarna, in my opinion.”

Mike Slow, floor saw operator, Concrete Cutting Systems, Philadelphia, US
Flatsaw testimonial from Philadelphia

Easy to manoeuver, transport and maintain

Husqvarna FS 3500 G is a mid-size saw developed for patch and service work. Equipped with a 27.5 kW petrol engine together with a self-adjusting belt tensioner for maximum convenience and belt life. Cutting depth capacity up to 311 mm with 750 mm diamond blade. Also ready for rental applications with adjustable handle bars, rpm gauge and hour meter. Water pump kit and light kit available as options.
+
+
+
+
+

Products

Filter by power source

Walk-behind saws

  • FS 7000 DL

    FS 7000 DL

    967 05 60-08

    Cutting depth, max
    623 mm
    Output power (As rated by the engine/motor manufacture)
    55.4 kW
    Blade diameter, max
    1500 mm
    • Deep cutting
    • Easy adjustment of tracking for straight cuts
    • Intuitive and ergonomic control panel
    • Optional 5th wheel to ease maneuverability

  • FS 7000 pointer up

    FS 7000 D

    967 20 79-54

    Cutting depth, max
    411 mm
    Output power (As rated by the engine/motor manufacture)
    55.4 kW
    Blade diameter, max
    1000 mm
    • Powerful and fuel-efficient
    • Low emissions
    • Intuitive and ergonomic control panel
    • Easy adjustment of tracking for straight cuts

  • FS 6600 3-speed, pointer down

    FS 6800 D

    965 15 23-50

    Cutting depth, max
    410 mm
    Output power (As rated by the engine/motor manufacture)
    50 kW
    Blade diameter, max
    1000 mm
    • Comprehensive control panel
    • Straight and fast cuts
    • Adjustable handles
    • Convenient transport between truck and work site

  • FS 5000, pointer up

    FS 5000 D

    967 20 73-40

    Cutting depth, max
    374 mm
    Output power (As rated by the engine/motor manufacture)
    35.5 kW
    Blade diameter, max
    900 mm
    • Powerful and fuel-efficient
    • Low emissions
    • Intuitive and ergonomic control panel
    • Easy adjustment of tracking for straight cuts

  • FS 4800 D, front pivot, pointer up

    FS 4800 D

    967 60 80-50

    Cutting depth, max
    375 mm
    Output power (As rated by the engine/motor manufacture)
    35 kW
    Blade diameter, max
    900 mm
    • Powerful and productive
    • Rear pivot version with high manoeuvrability
    • Straight and fast cuts
    • Low maintenance

  • FS 3500 G

    FS 3500 G

    967 62 13-07

    Cutting depth, max
    312 mm
    Output power (As rated by the engine/motor manufacture)
    27.5 kW
    Blade diameter, max
    750 mm
    • Automatic belt tensioner and Poly-V belt
    • Classic and intuitive control panel
    • Clam cleat pointer rope holder
    • Options include LED light-kit and water pump kit

  • FS 500-series, FS 524, FS 515, FS 513

    FS 524

    965 15 02-05

    Cutting depth, max
    241 mm
    Output power (As rated by the engine/motor manufacture)
    15.5 kW
    Blade diameter, max
    600 mm
    • Self-propelled
    • Low vibrations
    • Self-contained drive system
    • Optimal power transmission to the blade

    • NEW
    FS 500 E, pointer down

    FS 500 E

    967 96 36-01

    Cutting depth, max
    190 mm
    Rated input power
    7,5 kW
    Blade diameter, max
    500 mm
    • Easy to operate and service
    • CE-Eurotest certified and IE3 complient
    • Prepared for connectivity
    • Large integrated water tank

  • FS 413, single pointer

    FS 413

    965 15 01-02

    Cutting depth, max
    189 mm
    Output power (As rated by the engine/motor manufacture)
    8.7 kW
    Blade diameter, max
    500 mm
    • Low vibrations
    • Low maintenance
    • Easy to adjust the blade
    • Easy to transport

  • FS 413, single pointer

    FS 410 D

    965 15 01-01

    Cutting depth, max
    189 mm
    Output power (As rated by the engine/motor manufacture)
    6.6 kW
    Blade diameter, max
    500 mm
    • Low vibrations
    • Low maintenance
    • Easy to adjust the blade
    • Easy to transport

  • FS 400 LV, pointer down

    FS 400 LV

    965 14 82-01

    Cutting depth, max
    162 mm
    Output power (As rated by the engine/motor manufacture)
    8.7 kW
    Blade diameter, max
    450 mm
    • Easy to operate
    • Adjustable handles
    • Easy to transport
    • Large integrated water tank

  • FS 400 LV, 500 mm, pointer down

    FS 400 LV

    967 79 65-01

    Cutting depth, max
    187 mm
    Output power (As rated by the engine/motor manufacture)
    8.7 kW
    Blade diameter, max
    500 mm
    • Easy to operate
    • Adjustable handles
    • Easy to transport
    • Large integrated water tank

  • FS 309 pointer up

    FS 309

    967 67 83-02

    Cutting depth, max
    122 mm
    Output power (As rated by the engine/motor manufacture)
    6.3 kW
    Blade diameter, max
    350 mm
    • Easy to transport
    • Stable operation
    • Low vibrations
    • Low maintenance

  • FS 305, pointer down

    FS 305

    965 15 00-26

    Cutting depth, max
    125 mm
    Output power (As rated by the engine/motor manufacture)
    3.6 kW
    Blade diameter, max
    350 mm
    • Easy to transport
    • Stable operation
    • Low vibrations
    • Low maintenance

Compare products

navigationTools

Diagrip – a revolutionary diamond tool technology

With Diagrip™ the diamonds are specially treated to stay in place in the segments longer, and to be distributed optimally, delivering maximum efficiency to every diamond. The diamonds are exposed and expended at an even rate, which makes the edge very even and powerful, even when cutting hard materials like reinforced concrete.

One of the greatest benefits of the Diagrip™ technology is how fast and smooth the diamond tools cut through all types of construction materials. Diagrip™ tools stand for trouble-free cutting, especially in heavily reinforced concrete.
ELITE-CUT S35

Speed bridge

The Elite-Cut S65 and S45 blades feature a specially designed speed bridge between the segments. This design improves the cutting speed and smoothness even further through reduced lateral friction, better cooling and improved dust evacuation.

Choose the right tool quality for optimal performance

A diamond blade’s properties are determined by the application, the material to be cut and the machine to be used. Therefore our range of diamond blades is divided into different levels and is clearly labelled to make it even easier for you to choose the optimal blade for your type of cutting job.

Gold

Husqvarna diamond tools developed for intensive professional use in specialist applications. Provide maximum cutting speed and wear resistance. This quality class includes Husqvarna Diagrip technology floor saw blades.

Silver

Husqvarna diamond tools developed for professional use in all-round applications. Provide high cutting speed and wear resistance in all cutting. This quality class includes all Husqvarna Vari-Cut blades.

Bronze

Husqvarna diamond tools developed for occasional use. Provide good balance between performance and price in common cutting applications. This quality class includes all Husqvarna Tacti-Cut blades.

Husqvarna

Related products and accessories

Maximum productivity is not only about the performance of the machine. It’s also about uptime. The key for optimal uptime is fast, knowledgeable and customer-oriented support. This is why Husqvarna offers a global service network with a strong local presence.

When you need a diamond tool, new equipment, technical service or expert advice, Husqvarnas service is just a phone call away. This is yet another reason to go with a Husqvarna floor saw.

”Husqvarna is always willing to listen.”

Douglas Smith, Sunbelt rentals, Houston

navigationWheretobuy

Where to buy
Find a Husqvarna Construction office near you
You might need to accept that the browser uses your current location
Reset filters
You can find your contacts by performing a search above or zooming in on the map.